Thank you for visiting ELİAR at Glasstec 2022 fair.
If you want to review this page again, please save the link: https://qrco.de/glasstec22

AUTOMATION

Performance & Technical Features 

Custom Design to best fit your process. 
Distributed Control: Each scale controlled by independent weighing units. Multi-PLC architecture for batch plant. 
Redundant SCADA System: Optional 
Remote Access: 
Manual Intervention: 
Semi-Automatic modes: Each weighing module or PLC 
Reporting: Data Based 
Plant Wide Integration: Through data base 
Architecture: Siemens PLC based. Other PLCs possible on request 
Weighing Units: Siemens. Other weighing units possible on request 

Services: 

Start-up and Training: Included with 
separate pricing 
Cable projects: Optional 
Cable Procurement: Optional 
Cable and Cable Tray Installation: Optional 
Ambient temperature: -20 °C to + 40 °C 
Cabling Supervision: Optional 

WEIGHING CONTROLLER

Performance & Technical Features 

 Stand-alone operation: Yes. Through built-in display and keyboard 
Interface: Profinet or Modbus/TCP 
Scada integration: WinCC, TIA, INTOUCH (others possible on request) 
Local Display and Keyboard: 
Manual Intervention: Through built-in manual control buttons 
Remote Access: Possible through plant internet infrastructure 
Weighing Algorithm: Loss-in-weight / Weigh-in 
Calibration check outputs: Included 
Supported number of Silos: 4 (standard), up to 16 possible on request 
Weight Measurement: 3 or 4 load-cells can be directly connected to the weighing controller through a junction box (smart junction box option). Remote indication in field possible as an option. 
Weighing records: Recording of weighing results on plant data base possible. 
Plant Wide Integration: Possible through plant data base Architecture: S7 PLC based 
MCC Panel: Option 
Field Panel: Option 

Electrical Specifications 

Power Supply: 24VDC 
Controller: S7-1500 
Cable Procurement: Optional 
User Interface: 
Note: S7, WinCC, TIA are the trademarks of Siemens AG….INTOUCH is the trademark of Wonderware 

BIN-ACTIVATOR (BA)

ELİAR Bin-Activators are designed to provide uniform discharge of bulk solids from silos. It prevents bridging and compaction of materials on silo sidewalls.

Performance & Technical Features 

Custom Design to best fit your process. Removable bottom cone makes transportation and assembly easier. Manual slide gate at discharge point to stop material during maintenance of feeders. 
Construction: ST37, AISI304, Hardox depending on request 
Sealing System: Gasket

Electrical Specifications 

Drive: One or Two Unbalanced Motors 
(depending on size) 
Controllers: No 
Frequency: 50 or 60 Hz 
Voltage: 380, 440, 480 V 
Ambient temperature: -20 °C to + 40 °C 
Protection: IP 55 
Optional Protection: Tropic-proof 

SILOS and BATCH PLANT STEEL STRUCTURE

ELİAR Scales are designed to store bulk solids either filled mechanically or pneumatically.

Performance & Technical Features 

Custom Design to best fit your process layout. 
Dust Control: Bag filter or expansion pipe 
Flow aid: Vibrator Motor or Pneumatic Hammer 
Sensor: 3 or 4 load-cells 
Calibration check system: Option 
Calibration weights: Option 
Fill and Discharge Feeders: Excluded 
Construction: ST37, AISI304, Hardox depending 
on request. 
Lining: UHMWPE, types of Armor Steel 
depending on material 
Sealing System: Gasket 

SCALES (SC)

ELİAR Scales are designed for weighing/dosing of bulk solids while preventing dust emission.

Performance & Technical Features 

Custom Design to best fit your process layout. 
Dust Collectors: Option Pressure Relief Valve: Option 
High/Low Sensors: Option
Continuous Level Sensor: Option 
Bin-Activator: Option 
Fill and Discharge System: Excluded 
Construction: ST37, AISI304, Hardox depending on request. 
Lining: Sealing System: Gasket 

Electrical Specifications 

Drive: One or Two Unbalanced Motors/Pneumatic Hammers (depending on size) 
Controllers: No 
Frequency: 50 or 60 Hz 
Voltage: 380, 440, 480 V 
Ambient temperature: -20 °C to + 40 °C 
Protection: IP 55 
Optional Protection: Tropic-proof 

ELECTRO-MECHANICAL VIBRATING FEEDER (VF)

VF Electro-mechanical Vibrating Feeders are designed for conveying bulk solids (Sand, Cullet etc.).

Performance & Technical Features 

Custom Design to best fit your process. 

Types: Trough Feeder 
Construction: ST37, AISI304 depending on request 
Lining: Armor Steel, UHMWPE depending on raw material. Special linings for low nickel, low iron applications 
Capacity: 15 – 150 tph 
Length: 750 mm – 3500 mm 
Outlet Type: Bottom End, Front End with optional gate on discharge 
Isolation: Rubber Isolator, Springs (Compression/ Tension), Flexible Joint with Rubber Elements (compression/tension) 
Sealing System: Gasket, Rubber Lip, Snap on Profile, Compensator depending on the application

Electrical Specifications 

Drive: Unbalanced Motor (types depend on capacity request) 
Controllers: No 
Frequency: 50 or 60 Hz 
Voltage: 230, 400, 500 V / 220, 380, 440, 480 V 
Ambient temperature: -20 °C to + 40 °C 
Protection: IP 55 to DIN EN 60529 different protection with different types of drive 
Optional Protection: tropic-proof, external ventilation, thermal switch 

ELECTRO - MAGNETIC VIBRATING FEEDER (EVF)

EVF Electro-magnetic Vibrating Feeders are designed for conveying and dosing bulk solids (Sand, Cullet etc.).

Performance & Technical Features 

Custom Design to best fit your process. 

Types: Trough Feeder, Tubular Feeder 
Construction: ST37, AISI304 depending on request 
Lining: Armor Steel, UHMWPE depending on raw material. Special linings for low nickel, low iron applications 
Capacity: 0.5-150 tph 
Length: 500 mm -3000 mm 
Outlet Type: Bottom End, Front End with optional gate on discharge 
Isolation: Rubber Isolator, Springs (Compression/ Tension), Flexible Joint with Rubber Elements (compression/tension) 
Sealing System: Gasket, Rubber Lip, Snap on Profile, Compensator depending on the application 

Electrical Specifications 

Drive: Aviteq (Germany) (types depend on capacity request) 
Controllers: Aviteq (Germany) (types depend on drive) 
Frequency: 50 or 60 Hz 
Voltage: 230, 400, 500 V / 220, 380, 440, 480 V 
Ambient temperature: -20 °C to + 40 °C 
Protection: IP 55 to DIN EN 60529 different protection with different types of drive 
Optional Protection: tropic-proof, external ventilation, thermal switch 

MICRO DOSING UNIT (MDU)

MDU Micro Dosing Units are designed for dosing minor powdery of granular materials with high precision. Three load-cells provide higher weighing accuracy and resistance to external effects.

Performance & Technical Features 

Capacity: 3-6000 dm3/h 
Filling: External coarse filling feeder of any type 
Dosing: With built-in screw feeder 
Screw feeder: Any type depending on the material 
Construction: ST37, AISI304 depending on request 
Lining: UHMWPE 
Drive: Electrical 
Agitator drive: Electrical 
Inlet Dimension: Ø300 
Outlet Dimension: Ø42/ Ø76/ Ø114 
Sealing: Dust proof execution minimizing environmental effects as well as mix-up of material/contamination. 

Electrical Specifications 

Drive: Electric Motor 
Frequency: 50 or 60 Hz 
Voltage: 380, 440, 480 V 
Pressure: 4-6 Bar (for output gate valve) 
Ambient temperature: -20 °C to + 40 °C 
Protection: IP 55 to DIN EN 60529 different 
protection with different types of drive 
Output gate sensor: 24VDC/Potential free contact 
Output gate vale: 24VDC 

ROTATING VIBRATING FEEDER (RVF)

RVF Electro-mechanical Vibrating Feeders are designed for silo selection during unloading bulk solids (Sand, Cullet, Others).

Performance & Technical Features 

Custom Design to best fit your process 

Types: Trough Feeder 
Construction: ST37, AISI304 depending on request. 
Lining: Armor Steel, UHMWPE depending on raw material. Special linings for low nickel, low iron applications. 
Capacity: 75 – 150 tph. 
Length: 2500 mm – 3500 mm. 
Outlet Type: Bottom End with clutching and sealing system on discharge. 
Isolation: Rubber Isolator, Springs, Flexible Joint with Rubber Elements. 
Sealing System: Rubber Lip. 

 Electrical Specifications 

Drive: Unbalanced Motor (types depend on capacity request). 
Rotator Motor: Electric Motor 0.37 kW 
Controllers: No 
Frequency: 50 or 60 Hz 
Voltage: 230, 400, 500 V / 220, 380, 440, 480V 
Ambient temperature: -20 °C to + 40 °C 
Protection: IP 55 to DIN EN 60529 different protection with different types of drive. 

BAG OPENER (BO)

Manual Bag Opener Units used for opening small bags (25 kg.) without any dust emission during opening. Integrated dust collector and front door protects operators from dust exposure. These units can be used for all types of powders or granules.

Performance & Technical Features 

ATEX: No 
Integrated Dust Filter: Yes 
Filter Surface: 5.9 m2 
Air Volume: 1189 m³/hr 
Construction: ST37, AISI304 depending on request. 

Electrical Specifications

Fan Motor: 0,37 kW 
Purge Controller: Electronic (24VDC) 
Frequency: 50 or 60 Hz 
Voltage: 220, 380, 440, 480 V 
Ambient temperature: -20 °C to + 40 °C 

BELT CONVEYOR (BC)

Belt Conveyors are designed for horizontally conveying bulk solids (Sand, Cullet etc.). Designed according to European or US norms.

Performance & Technical Features 

Custom Design to best fit your process 
Construction: ST37 
Capacity: 20-200 tph 
Length: 3 m-300 m 
Width: 650/800/1000 mm 
Note: ELİAR reserves the right to change any information above without prior notice

Electrical Specifications 

Drive: Electrical (Heavy Duty or Extra Heavy-Duty Gearbox drives available) Motor specification adapted to the local electrical standards and regulations 
Frequency: 50 or 60 Hz 
Voltage: 380, 440, 480 V 
Ambient temperature: -20 °C to + 40 °C 
Protection: IP 55 to DIN EN 60529 different protection with different types of drive 
Optional Protection: tropic-proof, external ventilation, thermal switch 
Belt Alignment Switch: Isolated Contact output 
Rotation Sensor: Proximity Switch output 
Emergency Rope Switch: On both sides 

BUCKET ELEVATOR (BE)

Bucket Elevators are designed for vertically conveying bulk solids (Sand, Cullet etc.). Designed according to European or US norms.

Performance & Technical Features 

Custom Design to best fit your process.
Types: Belt Bucket Elevator
Construction: ST37, AISI304 depending on request, special stainless steel for Low Nickel / Low Iron for float glass applications
Buckets: Steel, Heavy Duty Reinforced steel, Polymer depending on raw material
Capacity: 20 – 200 tph 
Height: 10 m – 50 m 

Electrical Specifications

Drive: Electrical (Heavy Duty or Extra Heavy – Duty Gearbox drives available) Motor specification adapted to the local electrical standards and regulations
Controllers: No
Frequency: 50 or 60 Hz 
Voltage: 380, 440, 480 V 
Ambient temperature: -20 °C to + 40 °C 
Protection: IP 55 to DIN EN 60529 different protection with different types of drive 
Optional Protection: tropic-proof, external ventilation, thermal switch 
Belt Alignment Switch: Isolated Contact output 
Rotation Sensor: Proximity Switch output 

DIVERTER (DV)

DV Diverters are designed for diverting bulk solids (Sand, Cullet, Batch etc.) to silos, mixers, belt conveyors or bucket elevators. Reject type diverters especially used for rejecting of material after quality or contamination control.

Performance & Technical Features 

Types: Two-way type, Reject type 
Construction: ST37, AISI304 depending on request 
Lining: Armor Steel, UHMWPE depending on raw material. Special linings for low nickel, low iron applications 
Drive: Electrical or pneumatic 
Inlet/Outlet Dimension: 300×300, 400×400, 500×500 
Sealing: Dust proof execution minimizing environmental effects as well as mix-up of material/ contamination

Electrical Specifications 

Drive: Electric Motor or Piston 
Frequency: 50 or 60 Hz 
Voltage: 380, 440, 480 V 
Pressure: 4-6 Bar 
Ambient temperature: -20 °C to + 40 °C 
Protection: IP 55 to DIN EN 60529 different protection with different types of drive 
Optional Protection: tropic-proof, external ventilation, thermal switch 
Position sensors: 24VDC/Potential free contact 
Control valves: 24VDC 

DIVERTER (DV3)

DV3 (1 to 3) Diverters are designed for diverting bulk solids (Sand, Cullet, Batch etc.) to silos, mixers, belt conveyors or bucket elevators.

Performance & Technical Features 

Types: Three-way type 
Construction: ST37, AISI304 depending on request 
Lining: Armor Steel, UHMWPE depending on raw material. Special linings for low nickel, low iron applications 
Drive: Pneumatic 
Inlet/Outlet Dimension: 300×300, 400×400, 500×500 
Sealing: Dust proof execution minimizing environmental effects as well as mix-up of material/ contamination

Electrical Specifications 

Drive: Pneumatic 
Pressure: 4-6 Bar 
Ambient temperature: -20 °C to + 40 °C 
Position sensors: 24VDC/Potential free contact
Control valves: 24VDC

ROTARY DIVERTER (RDV)

RDV Rotary Diverters are designed for diverting bulk solids (Sand, Cullet, Batch etc.) to silos or mixers.

Performance & Technical Features 

Types: Six Way
Construction: ST37, AISI304 depending on request 
Lining: Armor Steel, UHMWPE depending on raw material. Special linings for low nickel, low iron applications 
Drive: Electrical 
Inlet/Outlet Dimension: Ø273 
Sealing: Dust proof execution minimizing environmental effects as well as mix-up of material/contamination

Electrical Specifications 

Drive: Electric Motor 
Frequency: 50 or 60 Hz 
Voltage: 380, 440, 480 V 
Ambient temperature: -20 °C to + 40 °C 
Pressure: 4-6 Bar 
Protection: IP 55 to DIN EN 60529 different protection with different types of drive 
Position sensors: 24VDC/Potential free contact 
Control valves: 24VDC 

SLIM DUST COLLECTOR (for Belt Conveyors) (SDC)

ELİAR SLIM DUST COLLECTOR for belt conveyors has been developed to control the emission of any kind of dust in all industrial sectors. ELİAR SLIM DUST COLLECTORS has been specially designed for limited height applications. It can be used on top of drive pulley hoods of belt conveyors, or on conveyor loading points (scale/feeder discharge points etc.) The automatic reverse air jet filter cleaning system makes ELİAR SLIM DUST COLLECTORS suitable for continuous operation.

Performance & Technical Features 

Integrated Dust Filter: Ultra-Web advanced fine fiber technology 
Filter Surface: 5.9 m2 
Air Volume: 1189 m³/hr 
Construction: ST37 
Filter Change: Two minutes by only one person
ATEX: No

Electrical Specifications 

Fan Motor: 0,37 kW 
Purge Controller: Electronic (24VDC) 
Frequency: 50 or 60 Hz 
Voltage: 220, 380, 440, 480 V 
Ambient temperature: -20 °C to + 40 °C 

ELİAR team members will be happy to help you at our booth Hall 15A34.

Metin GUNHOS
metin.gunhos@eliar.com.tr

Ari BALIMOGLU
ari.balimoglu@eliar.com.tr